Jotamastic 90

The above is minimum shelf life, thereafter the paint quality is subject to re-inspection. Ovennevnte er minimum holdbarhet, etter dette skal produktet kontrolleres. Forholdsregler ved påføring Dette produktet er kun til yrkesmessig bruk.

It is a surface tolerant, abrasion resistance, high solids, high build product. It is aluminium pigmented for improved barrier effect.

Specially designed for areas where optimum surface preparation is not possible or desired. Available with different hardeners for various substrate temperatures, Standard (Std) and Wintergrade (WG). It is an aluminium pigmented product specially designed for areas where optimum surface preparation is not possible or desired. Jotamastic Product description. Thinning by with Jotun Thinners is essential when using airless spray and is recommended when using a brush or roller.

Storage The product must be stored in accordance with national regulations. Keep the containers in a dry, cool, well ventilated space and away from sources of heat and ignition.

Containers must be kept tightly closed. Fully tintable in a wide range of colours, it is specifically designed to provide lasting protection in high-corrosive environments and can be used as a primer, mid or top coat. Substrate temperature °C5. This is a two component polyamine cured epoxy mastic coating. IKKJE skal rusta på laaang tid.

It is reinforced with glass flakes for improved abrasion and scratch resistance. Note: Pack size is litres (nom) and litres (nom), colour dependent, including hardener. Ini adalah produk yang memiliki toleransi tinggi terhadap permukaan, tahan terhadap abrasi, high soli high build. This product can also be overcoated with all single and two-pack topcoats. Produk ini memiliki banyak variasi warna sesuai dengan rangkaian warna dalam sistem Multicolor Industry (MCI) Jotun.

Didesain secara khusus untuk area dimana persiapan permukaan yang optimal tidak mungkin atau tidak ingin dilakukan. It can be applied at sub zero surface temperatures. Areas of Use - General: Primarily designed for maintenance and repair. Marine: Outside hulls, exterior and interior areas. The product is surface tolerant, high solids, high build and tintable in a wide range of colours.

This document is only for calculations in Jotspec.

Lower temperature may require additional thinner to reach correct application viscosity. You have the right to unsubscribe at any time. Congratulations, you have qualified for free shipping from this seller.

Jotun have now supplied us with quick recoat epoxy barrier coat primer. With a recoat window of hrs at degrees, you can now get two coats on in the same day so a. Pre-qualifications tested according to Edition of NORSOK M-5are still valid as the coating systems also fulfil all requirements in Edition 6.